Bowden cables for your manual Sachs 50/2 (502) ML, 503 2AL / 2BL, 50/3, 50/4 moped, moped or small motorcycle.
The cables are cut and fitted with end sleeves, adjusting screws and clamps.
The cable lengths are designed for an original handlebar.
Throttle cable length: 100 or 160 cm
Clutch cable length: 94 or 140 cm
Shift cable length: 97 or 160 cm
Front brake cable length: 93 or 160 cm
Decompressor cable length: 93 or 185 cm
We recommend lubricating the inside of the cable before installation.
Helpful assembly tools, grease and other attachments can be found in the accessories section.
A quality product manufactured in Germany.
Details
| Manufacturer | Made in Germany |
| Color | black |
| Quantity | 5 pcs |
| Material | Steel |
| Outer shell length | 930 mm, 940 mm, 970 mm, 1000 mm |
| Total length | 1400 mm, 1600 mm, 1850 mm |
| Nipple shape | Cylinder, Pears, Barrel (transverse) |
Suitable for the following models
| Sachs |
Accessories & related products
Alligator end piece for indoor cable, aluminum (per piece)
Number of connections: 1 pcs · Manufacturer: Alligator · Material: Aluminum · Area of application: Standard · Surface: raw · Color: silver · Total length: 12 mm · Ø outside: 3.1 - 4 mm · Ø inside: 2.2 mm · Number of components: 1 pcs
0,45 EUR
Motorex Spray Intact 200 ml
Manufacturer: Motorex · Area of application: Chemistry · Area of application: Workshop accessories · Contents [ml]: 200 ml · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous
16,40 EUR
Not in stock
82,00 EUR/l
Cable set incl. adjusting screws black | Sachs 50/2, 503 2AL/2BL (manual) high handlebars
Manufacturer: Made in Germany · Material: Brass · Material: Plastic · Material: Steel · Color: black · Quantity: 5 pcs · Ø Stranded wire: 1.2 mm · Ø Stranded wire: 1.5 mm · Total length: 1500 mm · Outer shell length: 1100 mm · Outer shell length: 1200 mm · Outer shell length: 1300 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
55,80 EUR
Not in stock
Moped fans like you also bought:
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Area of application: Gearbox lubrication with clutch · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift
11,10 EUR
24,67 EUR/l
Hot 
Leonelli 6V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Tension: 6 V · Surface: raw · Performance: 50 W · Type of current: Alternating current (AC) · Total length: 50 mm · Width: 27 mm · Height: 15 mm · Mounting type: Screws · Ø mounting hole: 6 mm
33,40 EUR
swiing® revival exhaust nut M35x2 galvanized | Sachs 50/2 (A1507)
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Thread type: M35x2 (standard thread) · Nut type: Union nut · Ø outside: 43 mm · Ø inside: 30 mm · Pony spare part no.: A1507 · Sachs spare part no.: 0242 048 101
16,70 EUR
swiing® revival air filter original gray | Sachs 503
Width: 68 mm · Manufacturer: swiing® revival parts · Camouflaged: No · Material: Plastic · Color: gray · Filter type: Standard sieve · Total length: 165 mm · Ø Internal connection: 20 mm · Height: 52 mm · Mounting type: Plug connection clamped · Area of application: Original · Area of application: Standard
50,20 EUR
swiing® revival clutch plates (2 pcs.) | Sachs 50/2, 503 2AL/2BL (A3887)
Ø inside: 29.7 mm · Ø inside: 36 mm · Manufacturer: swiing® revival parts · Material: Composite materials · Area of application: Standard · Material: Steel · Recording type: Interlocking · Number of slats: 2 pcs · Ø outside: 93.7 mm · Thickness: 3.3 mm · Pony spare part no.: A3887 · Sachs spare part no.: 0659 010 006
29,40 EUR
swiing® revival ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)
Bearing type: Deep groove ball bearing · Bearing cage: "-" Sheet steel cage ball-guided · Stock number: E15 · Inner ring width: 25.6 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Material: Steel · Area of application: High End · Area of application: Standard · Thread type: MF20.8x1 LH (fine/left-hand thread) · Width: 8 mm · Ø outside: 35 mm · Ø inside: 15 mm · Pony spare part no.: A2531 · Sachs spare part no.: 0286 079 105
55,80 EUR
Collection only possible with online purchase and appointment.
