Rubber seal for the gearshift and clutch lever of hand-shifted Sachs 50/2, 50/3, 503 2AL / 2BL and foot-shifted 50/4 engines.
Shaft seal dimensions:
- Outer diameter: 19 mm
- Inner diameter: 12.8 mm
- Width: 2.4 mm
Material: NBR Shore 70 (blue)
&reworked and accurately fitting version of the previously offered oil seal, the sealing lip no longer protrudes above the sealing ring.
Original Sachs spare part number: A3844
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
| Manufacturer | GPO |
| Material | Rubber |
| Ø outside | 19 mm |
| Ø inside | 12.8 mm |
| Thickness | 2.4 mm |
| Pony spare part no. | A3844 |
| Sachs spare part no. | 0650 017 000 |
Suitable for the following models
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 503 - ABL, 2AL / 2BL |
Accessories & related products
GPO gasket set with oil seals slotted version | Sachs 50/2 engine
Manufacturer: GPO · Area of application: Standard · Number of components: 14 pcs · Ø outlet inside: 28 mm · Hole pattern [mm]: 60 x 40 · Hole spacing inlet: 31 mm · Pony spare part no.: A2582 · Sachs spare part no.: 0286 156 001
44,60 EUR
Gasket set with oil seals Diaphragm version | Sachs 50/2
Area of application: Standard · Number of components: 16 pcs · Ø outlet inside: 28 mm · Hole pattern [mm]: 60 x 40 · Hole spacing inlet: 31 mm · Hole spacing inlet: 67 - 31 mm · Pony spare part no.: A2548 · Sachs spare part no.: 0286 125 021
44,60 EUR
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Area of application: Chemistry · Material: Silicone · Contents [ml]: 70 ml · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Color: gray · Temperature resistance (min.): -60 - 315 °C · Gap dimension (max.): 2 mm
22,20 EUR
317,14 EUR/l
Moped fans like you also bought:
BING O-ring Bing SRE & 85, Ø 20 mm
Place of use: Carburetor · Cord thickness: 1.4 mm · Manufacturer: BING · Area of application: Standard · Material: Rubber · Surface: raw · Number of components: 1 pcs · Ø inside: 17.2 mm · Ø outside: 20 mm · Color: black · Pony spare part no.: A4281 · Sachs spare part no.: 0250 160 101
3,25 EUR
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Bearing type: Shoulder bearing · Stock number: E15 · Inner ring width: 8 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing clearance: CN (standard) · Bearing cage: Brass cage ball-guided · Groove ring: No · Area of application: Standard · Material: Brass · Material: Steel · Width: 8 mm · Surface: blank · Ø inside: 15 mm · Ø outside: 35 mm · Pony spare part no.: A1149 · Sachs spare part no.: 0232 017 006
27,80 EUR
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Bearing type: Shoulder bearing · Stock number: BO15 · Inner ring width: 10 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing cage: Brass cage ball-guided · Area of application: Standard · Material: Brass · Material: Steel · Width: 10 mm · Surface: blank · Ø inside: 15 mm · Ø outside: 40 mm · Pony spare part no.: A4502 · Sachs spare part no.: 0932 007 001
27,80 EUR
Gasket set large | Sachs 503 engine
Area of application: Standard · Material: Aluminum · Material: Copper · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 14 pcs · Ø outlet inside: 13.3 mm · Hole pattern [mm]: 60 x 40 · Hole spacing inlet: 32 mm
44,60 EUR
Flat nut M21x1 LH clutch | Sachs 50/2, 503 AB/ABL/2AL/2BL (A1504)
Drive: External hexagon · Nut type: Hexagon flat nut · Width across flats SW: 26 mm · Thread type: MF21x1 LH (fine/left-hand thread) · Pony spare part no.: A1504 · Sachs spare part no.: 0242 030 005 · Sachs spare part no.: 0242 030 105
8,40 EUR
swiing® revival clutch plates (2 pcs.) | Sachs 50/2, 503 2AL/2BL (A3887)
Manufacturer: swiing® revival parts · Area of application: Standard · Material: Composite materials · Material: Steel · Recording type: Interlocking · Ø inside: 29.7 mm · Ø inside: 36 mm · Ø outside: 93.7 mm · Number of slats: 2 pcs · Thickness: 3.3 mm · Pony spare part no.: A3887 · Sachs spare part no.: 0659 010 006
29,40 EUR
swiing® revival ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)
Bearing type: Deep groove ball bearing · Stock number: E15 · Inner ring width: 25.6 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Bearing cage: "-" Sheet steel cage ball-guided · Area of application: High End · Area of application: Standard · Material: Steel · Ø inside: 15 mm · Width: 8 mm · Ø outside: 35 mm · Thread type: MF20.8x1 LH (fine/left-hand thread) · Pony spare part no.: A2531 · Sachs spare part no.: 0286 079 105
55,80 EUR
Collection only possible with online purchase and appointment.
