Original clutch with Ø 56 mm for Piaggio Ciao, SI, Bravo and Boxer mopeds / mopeds with mono gearbox.
From the factory, this bell diameter was used in Switzerland with 16 inch cast rims.
Mäsig-läsig! – We strive to offer you the widest range of moped spare parts. However, this product is of rather poor quality and is not recommended by us. Should you nevertheless choose this item, we understand, but cannot offer you any guarantee or exchange.
The clutch bell should be disassembled and greased before use. Depending on the batch, unbalance, flash rust and medium oil seals must also be expected.
Details
Manufacturer | Quenching |
Ø Outer pulley | 56 mm |
Area of application | Standard |
Material | Steel |
Surface | coated |
Material addition | Composite materials |
Ø inside | 12 mm, 8.45 mm |
Ø outside | 90 mm |
Number of jaws | 3 pcs, 2 pcs |
Number of springs | 3 pcs, 2 pcs |
Suitable for the following models
Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao Si Bravo/Superbravo Boxer Grillo |
Accessories & related products
Moped fans like you also bought:
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Thread type: MF12x1 (fine pitch thread) · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
11,10 EUR
Bumm mirror round Inox
Manufacturer: Bumm · Material: Chrome steel (stainless steel) · Material: Steel · Surface: chrome-plated · Ø mirror surface: 107 mm · Ø mirror rod: 8 mm · Mirror rod length: 300 mm · Clamping diameter: 22 mm · Color: Chrome · Total length: 360 mm · Thread size: M8 · Thread type: M8x1.25 (standard thread)
27,80 EUR
EFFE Condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: EFFE · Area of application: Original · Area of application: Standard · Capacity: 0.26 µF · Mounting type: Tab for screwing · Connection type: Cable for screwing · Ø outside: 18 mm · Ø mounting hole: 4.4 mm · Height: 26 mm · Piaggio spare part no.: 102939
13,30 EUR
Dell'Orto 13/13 SHA carburetor hand choke | Piaggio Ciao PX, C24
Manufacturer: Dell'Orto · Total length: 46 mm · Camouflaged: No · Area of application: Tuning · Material: Aluminum · Width: 60 mm · Carburetor type: SHA (type 3) · Nominal diameter: 13 mm · Ø Internal connection: 16 mm · Ø without reducing sleeve: 18 mm · Ø Inside entrance: 13 mm · Ø Output inside: 13 mm · Color: black · Ø Air filter connection: 50.8 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 5.2 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M5 · Nozzle size: 66 · Height: 96 mm
67,00 EUR
Cable set black matt | Piaggio Ciao, SI, Bravo, Boxer
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Manufacturer: Made in Germany · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm · Material: Steel · Quantity: 4 pcs · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Color: black
22,20 EUR