High-quality, simple number plate holder made of black plastic with «mofakult» imprint for your moped / moped.
The number holder is attached to the rear mudguard or the side number holder. There are seven attachment points available for this purpose. If new holes need to be drilled into the mudguard, marking them in advance makes it easier to position them optimally.
After the license plate holder has been attached, the number plate is then fastened with two M5 screws. Extra threaded holes have been embedded in the plastic for this purpose. The use of spring washers is recommended to secure the number plate.
You can find the corresponding screws for the number frame in the accessories section.
Merchandise product of the Swiss quality brand mofakult Merch.
Details
| Manufacturer | mofakult Merch |
| Mounting type | Nuts & bolts |
| Material | Plastic |
| Color | black |
| Height | 11 mm |
| Thread type | M5x0.8 (standard thread) |
| Ø mounting hole | 6 mm |
| Number of fixing points | 9 pcs, 2 pcs |
| Total length | 175 mm |
| Width | 108 mm |
| Hole spacing | 50 mm |
| Thread length | 6 mm |
Accessories & related products
Plastic license plate holder
Color: black · Manufacturer: Made in Switzerland · Mounting type: Nuts & bolts · Material: Brass · Material: Plastic · Thread type: M5x0.8 (standard thread) · Ø mounting hole: 6 mm · Height: 11 mm · Number of fixing points: 9 pcs · Total length: 175 mm · Width: 108 mm · Hole spacing: 50 mm · Thread length: 6 mm
9,15 EUR
Serrated lock washer M4 - M12 galvanized
Material: Steel · Surface: galvanized (blue) · Thread size: M10 · Thread size: M12 · Thread size: M4 · Thread size: M5 · Thread size: M6 · Thread size: M7 · Thread size: M8 · Ø inside: 4.5 mm · Ø inside: 5.5 mm · Ø inside: 6.35 mm · Ø inside: 7.4 mm · Ø inside: 10.8 mm · Ø inside: 12.8 mm
0,35 EUR
M6x22 hexagon head screw, galvanized
Material: Steel · Surface: galvanized (blue) · Color: silver · Thread type: M6x1 (standard thread) · Drive: External hexagon · Total length: 26 mm · Screw head: Hexagon · Strength class: 8.8 · Thread length: 22 mm · Width across flats SW: 10 mm · Number of components: 1 pcs · Area of application: Standard
1,25 EUR
Screw M5x10 pan-head Allen key, galvanized
Material: Steel · Thread type: M5x0.8 (standard thread) · Drive: Hexagon socket · Total length: 13 mm · Screw head: Lens head · Surface: galvanized (blue) · Ø External head: 9.5 mm · Shank: No · Strength class: 10.9 · Thread length: 10 mm · Width across flats SW: 3 mm
1,05 EUR
Moped fans like you also bought:
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø Cable bushing: 1.6 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Ø outside: 5 mm · Thread type: M4x0.7 (standard thread) · Drive: Slot · Screw head: Lens head · Total length: 6 mm · Thread length: 4 mm · Number of components: 2 pcs
2,30 EUR
Stand 14 mm axle (1A quality) | Piaggio Ciao PX, C24
Color: black · Manufacturer: Made in Italy · Material: Steel · Surface: varnished · Stand base - center mount (A): 232 mm · Total width of stand base (B): 200 mm · Wide receptacle (C): 78 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 20 mm · Total height: 250 mm
34,60 EUR
Headlight black | Piaggio Ciao PX, C24
Color: black · Manufacturer: Made in Italy · Mounting type: Screws · Housing material: Plastic · Lens material: Plastic · Height: 90 mm · Number of fixing points: 2 pcs · Bulb holder: P26s · Tension: 6 V · Tension: 12 V · Area of application: Original · Area of application: Standard · Test mark: none · Speedometer recording: 48 mm · Width: 125 mm · Battery operated: No · Switch included: Yes · Ø External connection: 6.3 mm · Depth: 147 mm · Piaggio OEM number: 584240
43,80 EUR
Tail light black | Piaggio Ciao PX, C24, Bravo
Manufacturer: Made in Italy · Material: Plastic · Test mark: none · Color: black · Color: red · Bulb holder: BA9s · Width: 130 mm · Depth: 43 mm · Battery operated: No · Height: 58 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
21,80 EUR
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Color: black · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm
23,00 EUR
Collection only possible with online purchase and appointment.
