41.0 mm tuning piston with two 1.5 mm rectangular piston rings with flank lock (FS) for blown swiing tuning cylinders made of aluminum suitable for mopeds / mopeds with Sachs 502, 50/2, 50/3 and 50/4 engines.
The detailed dimensions of the piston according to the technical drawing can be found in the details. In addition, you can find out about the relevant piston rings, their stems and locking types on the legend in the pictures.
The piston kit should only be used for the swiing aluminum racing cylinder, which is listed in the accessories section. The piston is characterized by its high-quality and precise fit.
The piston kit contains piston pins, piston clips and piston rings.
You will find the appropriate assembly tools, piston pin locks and, if necessary, the corresponding cylinder in the accessories section. You will find the corresponding cylinder among the accessories.
Exceptional product for the highest demands of the quality brand swiing®.
Details
| Nominal diameter | 41 mm |
| Manufacturer | swiing® ingenious parts |
| Ø outside piston (A) | 40.96 mm |
| Compression height (C) | 28 mm |
| Curvature (D) | 3.4 mm |
| Total piston height (E) | 53 mm |
| Number of piston rings (F) | 2 pcs |
| Piston ring mold | Rectangular ring |
| Piston ring impact | Flank safety device (FS) |
| Piston ring height | 1.5 mm |
| Ø piston pin (B) | 12 mm |
Suitable for the following models
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 50/5 503 - AAL, ABL, 2AL / 2BL |
Accessories & related products
GPO piston pin extractor Ø 10, 12, 14 mm
Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Total length: 130 mm · Width across flats SW: 10 mm · Width across flats SW: 17 mm · Manufacturer: GPO · Area of application: (Dis)assembly tool · Material: Steel · Surface: burnished · Number of components: 7 pcs
22,20 EUR
swiing set stud bolts M6 / M5 Sachs (12.9 strength) Special
Diameter: 6 mm · Total length: 27.3 mm · Width across flats SW: 8 mm · Manufacturer: swiing · Material: Steel · Surface: blue galvanized · Surface: burnished · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Drive: External hexagon · Thread length: 9.5 mm · Thread length: 14 mm · Strength class: 10 · Strength class: 12.9
21,50 EUR
swiing® ingenious 41 mm cylinder kit Racing (Version 2.0) fan-cooled | Sachs 50/2 (CH)
Nominal diameter: 41 mm · Manufacturer: swiing® ingenious parts · Material: Cast aluminum · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 45 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.3 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 60 x 40 / 37 x 37 · Camouflaged: No · Area of application: Racing
245,80 EUR
swiing 41 mm cylinder kit Racing fan-cooled (Version 2.0) | Sachs 50/2, 50/3, 50/4 (DE)
Nominal diameter: 41 mm · Manufacturer: swiing · Material: Cast aluminum · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 51 x 40 · Camouflaged: No · Area of application: Racing
245,80 EUR
Moped fans like you also bought:
Light coil 6V with cable
Area of application: Original · Area of application: Standard · Tension: 6 V · Performance: 17 W · Total length: 76.8 mm · Ø mounting hole: 4.1 mm · Height: 25.2 mm · Number of fixing points: 2 pcs · Ø Internal flywheel: 90 mm · Hole spacing: 54 mm · Mounting type: Screws
21,10 EUR
Not in stock
Hot 
Leonelli 6V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Surface: raw · Tension: 6 V · Type of current: Alternating current (AC) · Performance: 50 W · Total length: 50 mm · Width: 27 mm · Ø mounting hole: 6 mm · Height: 15 mm · Mounting type: Screws
33,40 EUR
swiing® revival Silentblock Ø 19.3 x 19 mm | Sachs 50/2 (A1940)
Ø inside: 8.5 mm · Ø outside: 19.3 mm · Ø Bundle: 13 mm · Ø Bundle: 15 mm · Waistband height: 1.5 mm · Manufacturer: swiing® revival parts · Material: Rubber · Area of application: Standard · Material: Steel · Color: black · Surface: raw · Total length: 19 mm · Pony spare part no.: A1940 · Sachs spare part no.: 0260 101 000
7,70 EUR
Not in stock
Gasket cylinder base Sachs 50/2 & 503 (1 mm)
Material: Sealing carton · Area of application: Standard · Thickness: 1 mm · Place of use: Cylinder base · Hole pattern [mm]: 60 x 40 · Alternative version of the Pony Spare part no.: A1848 · Alternative version of Sachs spare part no.: 0250 113 100
5,25 EUR
Collection only possible with online purchase and appointment.
