38 mm tuning cylinder made of aluminum with Nikasil coating and 50 cc displacement suitable for mopeds / mopeds with Sachs 503 2AL, AAL, 2BL, ABL CH engine.
The racing kit offers a performance increase over the entire speed range, with a focus on low speeds and torque. Compared to the original cylinder, this racing cylinder has had the seal removed and the intake enlarged. The overflow channels have also been enlarged and the piston skirt has been optimized to improve the timing. The exhaust port has also been designed at a favorable angle.
In addition to the piston, the scope of delivery also includes the matching piston rings, clips, pins, stud bolts and the required gaskets for the base, intake and cylinder head.
Cylinder material: Cast aluminum with Nikasil coating
Piston material: Cast aluminum
Bore: 38 mm
Capacity: 49 cm³
Ø Cylinder neck: 45.5 mm
Ø Exhaust inside: 18.5 mm
Ø Exhaust outside: 25.8 mm
Inlet hole spacing: 32 mm
Inlet thread: M6 x 0.8 mm
Ø inlet: 14 mm
Cylinder base hole pattern: 40 x 60 mm
Ø stud bolt hole: 6.9 mm
Cylinder cover hole pattern: 37 x 37 mm
Piston pin: 12 mm
Note: For Sachs 503 ABL engines, the engine housing may need to be ground out slightly in the area of the cylinder neck.
Matching cylinder heads and corresponding add-on parts for the replacement cylinder can be found in the accessories section.
Branded product from the manufacturer AKOA.
Details
| Nominal diameter | 38 mm |
| Manufacturer | AKOA |
| Area of application | Standard |
| Material | Aluminum |
| Surface | nikasil-coated |
| Displacement | 50 ccm |
| Crankshaft stroke | 43 mm |
| Ø cylinder neck | 45.5 mm |
| Ø Outlet outside | 25.8 mm |
| Ø outlet inside | 18.5 mm |
| Ø Inlet inside | 14 mm |
| Thread inlet | M6x1 (standard thread) |
| Hole spacing inlet | 32 mm |
| Number of fixing points | 4 pcs |
| Ø piston pin (B) | 12 mm |
| Outlet type | clamped |
| Hole pattern [mm] | 40 x 60 / 37 x 37 |
| Decompressor | No |
Suitable for the following models
| Sachs | 503 - AAL, ABL, 2AL / 2BL |
Accessories & related products
swiing 15 mm carburetor tuning camouflaged | Sachs 503
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Total length: 66 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Width: 50 mm · Mixed oil connection: No · Height: 95 mm · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m · Area of application: Tuning
92,90 EUR
swiing® revival carburetor 12 mm original | Sachs 503
Manufacturer: swiing® revival parts · Material: Aluminum · Camouflaged: No · Carburetor type: SRE · Nominal diameter: 12 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm · Total length: 65 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 5 mm · Ø fuel hose connection: 6 mm · Width: 55 mm · Mixed oil connection: No · Height: 112 mm · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 52 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m · Area of application: Standard · Pony OEM number: A2442 · Sachs OEM number: 0281 115 105
92,90 EUR
swiing® ingenious tuning set 40 mm | Sachs 503 (fan-cooled)
Nominal diameter: 40 mm · Manufacturer: GPO · Manufacturer: NGK · Manufacturer: swiing® ingenious parts · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Hole pattern [mm]: 60 x 40 · Decompressor: No · Camouflaged: No · Area of application: Tuning
528,80 EUR
Not in stock
swiing® ingenious tuning cylinder 40 mm | Sachs 503
Nominal diameter: 40 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 60 x 40 / 37 x 37 · Decompressor: No · Camouflaged: No · Area of application: Tuning
197,50 EUR
Not in stock
swiing® ingenious tuning cylinder 38 mm | Sachs 503
Nominal diameter: 38 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 42 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 60 x 40 / 37 x 37 · Decompressor: No · Camouflaged: No · Area of application: Tuning
191,70 EUR
Not in stock
swiing® ingenious 15mm tuning set carburetor HG long | Sachs 503
Nominal diameter: 15 mm · Manufacturer: swiing · Area of application: Tuning · Color: black · Carburetor type: SRE · Total length: 66 mm · Total length: 165 mm · Mounting type: Flange · Mounting type: Plug connection clamped · Ø Internal connection: 20 mm · Width: 50 mm · Height: 52 mm · Width: 68 mm · Height: 95 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Hole spacing inlet: 32 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: No · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
197,50 EUR
AKOA 41 mm cylinder kit | Sachs 503 2AL, AAL, 2BL, ABL
Manufacturer: AKOA · Material: Aluminum · Surface: nikasil-coated · Crankshaft stroke: 43 mm · Displacement: 57 ccm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.8 mm · Nominal diameter: 41 mm · Ø Inlet inside: 14 mm · Ø piston pin (B): 12 mm · Thread inlet: M6x1 (standard thread) · Area of application: Tuning · Number of fixing points: 4 pcs · Ø outlet inside: 18.5 mm · Outlet type: clamped · Hole spacing inlet: 32 mm · Hole pattern [mm]: 40 x 60 / 37 x 37 · Decompressor: No
209,10 EUR
Not in stock
AKOA 40 mm cylinder kit | Sachs 503 2AL, AAL, 2BL, ABL
Manufacturer: AKOA · Material: Aluminum · Surface: nikasil-coated · Crankshaft stroke: 43 mm · Displacement: 54 ccm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.8 mm · Nominal diameter: 40 mm · Ø Inlet inside: 14 mm · Ø piston pin (B): 12 mm · Thread inlet: M6x1 (standard thread) · Area of application: Tuning · Number of fixing points: 4 pcs · Ø outlet inside: 18.5 mm · Outlet type: clamped · Hole spacing inlet: 32 mm · Hole pattern [mm]: 40 x 60 / 37 x 37 · Decompressor: No
197,50 EUR
BAD ASS Ø 41 mm "Pandora" tuning cylinder | Sachs 503, 50/2, 502
Nominal diameter: 41 mm · Manufacturer: BAD ASS · Material: Gray cast iron · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 23 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 40 x 60 / 37 x 37 · Camouflaged: No · Area of application: Tuning
220,80 EUR
BAD ASS Ø 43 mm "Pandora" BigBore tuning cylinder | Sachs 503, 50/2, 502
Nominal diameter: 43 mm · Manufacturer: BAD ASS · Material: Gray cast iron · Area of application: Tuning · Surface: sandblasted · Displacement: 63 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 23 mm · Ø Inlet inside: 19 mm · Number of fixing points: 4 pcs · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Hole pattern [mm]: 40 x 60 / 37 x 37 · Camouflaged: No
371,90 EUR
Intake manifold 15 mm short | Sachs 503 2AL, 2BL
Total length: 50 mm · Material: Aluminum · Mounting type: Screws · Thread type: M6x1 (standard thread) · Ø inside: 15 mm · Ø External connection: 20 mm · Area of application: Tuning · Number of fixing points: 2 pcs · Hole spacing inlet: 32 mm · Sachs OEM number: A2177
52,20 EUR
Moped fans like you also bought:
BING O-ring Bing SRE & 85, Ø 20 mm
Cord thickness: 1.4 mm · Manufacturer: BING · Place of use: Carburetor · Material: Rubber · Surface: raw · Ø inside: 17.2 mm · Color: black · Ø outside: 20 mm · Number of components: 1 pcs · Area of application: Standard · Pony OEM number: A4281 · Sachs OEM number: 0250 160 101
3,35 EUR
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Bearing type: Shoulder bearing · Bearing cage: Brass cage ball-guided · Stock number: BO15 · Inner ring width: 10 mm · Manufacturer: NSK · Material: Brass · Material: Steel · Surface: blank · Width: 10 mm · Ø outside: 40 mm · Ø inside: 15 mm · Area of application: Standard · Ball bearing closed: No · Pony OEM number: A4502 · Sachs OEM number: 0932 007 001
28,90 EUR
swiing® revival gearbox cover gasket | Sachs 503 AAL, ABL, AB, AC, ADV, 2AL, 2BL (A1888)
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Width: 130 mm · Total length: 200 mm · Thickness: 0.35 mm · Number of fixing points: 6 pcs · Number of components: 1 pcs · Pony OEM number: A1888 · Sachs OEM number: 0250 150 000
6,30 EUR
Oil seal NBR 15/30/5.5 A crankshaft | Sachs (A4215 & A5602)
Temperature resistance (min.): -30 - 100 °C · Simmering type: A - With rubberized outer part / one sealing lip. · Place of use: Crankshaft · Manufacturer: Sachs · Material: NBR · Surface: rubberized · Ø inside: 15 mm · Ø outside: 30 mm · Width: 5.5 mm · Pony OEM number: A5602 · Sachs OEM number: 0230 111 100
9,20 EUR
Gasket set large | Sachs 503 engine
Material: Aluminum · Material: Copper · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 13.3 mm · Number of components: 14 pcs · Area of application: Standard · Hole spacing inlet: 32 mm · Hole pattern [mm]: 60 x 40
46,40 EUR
swiing® revival air filter Racing | Sachs 503
Manufacturer: swiing® revival parts · Material: Plastic · Color: black · Mounting type: Plug connection clamped · Filter type: Racing screen · Width: 68 mm · Ø Internal connection: 20 mm · Total length: 165 mm · Height: 52 mm · Area of application: Tuning · Camouflaged: No
69,60 EUR
swiing® ingenious 15 mm intake manifold long version | Sachs 503 2AL, 2BL
Total length: 70 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Mounting type: Screws · Thread type: M6x1 (standard thread) · Ø inside: 15 mm · Ø External connection: 20 mm · Area of application: Tuning · Number of fixing points: 2 pcs · Height flange center hole: 70 mm · Total height: 80 mm · Hole spacing inlet: 32 mm · Camouflaged: No · Pony OEM number: A2176
69,60 EUR
Collection only possible with online purchase and appointment.
