Pair of clutch plates for your moped / moped with Sachs 504, 505 and 535 engine (manual and automatic).
Details
| Number of slats | 2 pcs |
| Ø inside | 37 mm |
| Ø outside | 61 mm, 65.6 mm |
| Thickness | 3.4 mm |
| Area of application | Standard |
Suitable for the following models
| Sachs | 504 (ohne Tretwelle) 505 (mit Tretwelle) - 1A (AT), 2 A (HG) 508 - 1 A 535 |
| Hercules | Prima - 2, 3, 4, 5, Optima |
Moped fans like you also bought:
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
11,50 EUR
25,56 EUR/l
Rubber grommet round 2 cables | Sachs 502, 503, 504 (A1923)
Material: Rubber · Area of application: Standard · Color: black · Surface: raw · Ø outside: 12.8 mm · Ø Cable bushing: 2.2 mm · Ø Bundle: 10.5 mm · Ø mounting hole: 8.5 mm · Total length: 7 mm · Waistband height: 2 mm · Pony OEM number: A1923 · Sachs OEM number: 0260 020 000
5,70 EUR
Oil seal NBR 15/32/5.5 A Main shaft | Sachs 504, 505, 535 (A4216)
Temperature resistance (min.): -30 - 100 °C · Simmering type: A - With rubberized outer part / one sealing lip. · Ø inside: 15 mm · Ø outside: 32 mm · Width: 5.5 mm · Manufacturer: Sachs · Material: NBR · Surface: rubberized
10,40 EUR
Oil seal NBR 15/30/5.5 A crankshaft | Sachs (A4215 & A5602)
Simmering type: A - With rubberized outer part / one sealing lip. · Manufacturer: Sachs · Material: NBR · Surface: rubberized · Place of use: Crankshaft · Width: 5.5 mm · Ø inside: 15 mm · Ø outside: 30 mm · Temperature resistance (min.): -30 - 100 °C · Pony OEM number: A5602 · Sachs OEM number: 0230 111 100
9,25 EUR
Oil seal NBR 15/35/7 AS crankshaft | Sachs 504, 535 (A4214)
Simmering type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Manufacturer: Sachs · Material: NBR · Surface: rubberized · Place of use: Crankshaft · Ø inside: 15 mm · Ø outside: 35 mm · Width: 7 mm · Temperature resistance (min.): -30 - 100 °C
10,40 EUR
NTN 6202 Ball bearing 15/35/11
Bearing type: Deep groove ball bearing · Stock number: 6202 · Inner ring width: 11 mm · Manufacturer: NTN · Ball bearing closed: No · Bearing clearance: CM (special/noise-reduced) · Bearing cage: "-" Sheet steel cage ball-guided · Groove ring: No · Material: Steel · Surface: blank · Ø inside: 15 mm · Ø outside: 35 mm · Width: 11 mm
8,00 EUR
Starter cable / clutch cable Ø 1.5 mm x 185 cm | Sachs 504 (P927)
Ø nipple: 4.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Steel · Ø Stranded wire: 1.5 mm · Cable length: 1850 mm · Number of components: 1 pcs · Nipple length: 12.5 mm · Area of application: Standard · Pony OEM number: P927
5,70 EUR
Collection only possible with online purchase and appointment.
