High-quality internal starter or internal clutch cable suitable for your moped / moped with Sachs 504 engine.
The nipple on this starter cable is specially twisted / tapered.
Ø Strand: 1.50 mm
Cable length: 1850 mm
Ø nipple: 4.5 / 6 mm
Nipple length: 12.5 mm
Original Pony spare part number: P927
A quality product made in Germany.
Details
| Ø nipple | 4.5 mm, 6 mm |
| Nipple length | 12.5 mm |
| Manufacturer | Made in Germany |
| Material | Steel |
| Ø Stranded wire | 1.5 mm |
| Number of components | 1 pcs |
| Cable length | 1850 mm |
| Area of application | Standard |
| Pony spare part no. | P927 |
Suitable for the following models
| Sachs | 504 (ohne Tretwelle) |
Accessories & related products
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Number of components: 1 pcs
3,15 EUR
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Ø outside: 5 mm · Thread type: M4x0.7 (standard thread) · Total length: 6 mm · Thread length: 4 mm · Number of components: 2 pcs
2,25 EUR
Motorex Spray Intact 200 ml
Manufacturer: Motorex · Area of application: Chemistry · Area of application: Workshop accessories · Contents [ml]: 200 ml · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous
16,40 EUR
Not in stock
82,00 EUR/l
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Number of components: 1 pcs
3,15 EUR
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Material: Steel · Area of application: Standard · Surface: blue galvanized · Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Cable length: 2200 mm · Number of components: 1 pcs
2,70 EUR
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Ø outside: 5 mm · Thread type: M4x0.7 (standard thread) · Total length: 6 mm · Thread length: 4 mm · Number of components: 2 pcs
2,25 EUR
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Area of application: Gearbox lubrication with clutch · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift
11,10 EUR
24,67 EUR/l
Rubber grommet round 2 cables | Sachs 502, 503, 504 (A1923)
Waistband height: 2 mm · Material: Rubber · Area of application: Standard · Color: black · Surface: raw · Total length: 7 mm · Ø Cable bushing: 2.2 mm · Ø Bundle: 10.5 mm · Ø mounting hole: 8.5 mm · Ø outside: 12.8 mm · Pony spare part no.: A1923 · Sachs spare part no.: 0260 020 000
5,45 EUR
Oil seal NBR 15/30/5.5 A crankshaft | Sachs (A4215 & A5602)
Temperature resistance (min.): -30 - 100 °C · Simmering type: A - With rubberized outer part / one sealing lip. · Manufacturer: Sachs · Material: NBR · Surface: rubberized · Width: 5.5 mm · Ø outside: 30 mm · Place of use: Crankshaft · Ø inside: 15 mm · Pony spare part no.: A5602 · Sachs spare part no.: 0230 111 100
8,85 EUR
Oil seal NBR 15/35/7 AS crankshaft | Sachs 504, 535 (A4214)
Simmering type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Ø inside: 15 mm · Manufacturer: Sachs · Material: NBR · Surface: rubberized · Place of use: Crankshaft · Width: 7 mm · Ø outside: 35 mm · Temperature resistance (min.): -30 - 100 °C
9,95 EUR
NTN 6202 Ball bearing 15/35/11
Bearing cage: "-" Sheet steel cage ball-guided · Ø inside: 15 mm · Stock number: 6202 · Inner ring width: 11 mm · Manufacturer: NTN · Bearing clearance: CM (special/noise-reduced) · Groove ring: No · Material: Steel · Surface: blank · Bearing type: Deep groove ball bearing · Width: 11 mm · Ø outside: 35 mm · Ball bearing closed: No
7,70 EUR
Collection only possible with online purchase and appointment.
