Scheibenbremse
Brake caliper, brake hose & brake lever for EBR forks
Material: Cast aluminum · Surface: varnished · Color: gray · Cable length: 900 mm · Brake lever length (lever length): 162 mm · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs · Ø Handlebars: 22 mm · Hole spacing: 32 mm · Hole spacing: 60 mm · Thread type: M8x1.25 (standard thread)
187,70 EUR
Brake line 0.9 - 1.9 m (selection) black 28 / 90° incl. banjo bolts
Material: Rubber · Material: Steel · Color: black · Cable length: 900 mm · Cable length: 1000 mm · Cable length: 1150 mm · Cable length: 1400 mm · Cable length: 1600 mm · Cable length: 1700 mm · Cable length: 1900 mm · Mounting type: Screws · Thread type: MF10x1.25 (fine pitch thread)
27,40 EUR
EBR telescopic fork aluminum (Harry) black | Puch
Manufacturer: EWC · Material: Aluminum · Material: Steel · Surface: chrome-plated · Surface: varnished · Color: Chrome · Color: black · Adjustable: Yes · Ø spars: 30 mm · Spar end distance (center-center): 150 mm · Ø outer head tube: 26 mm · Ø head tube inside: 22.3 mm · Head tube length: 200 mm · Total length: 680 mm · Fork bridge - center wheel axle: 450 mm · Thread type: MF26x1 (fine pitch thread) · Thread length: 58 mm
274,70 EUR
swiing® ingenious nut M8 "Special" hexagon socket
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Area of application: Road use · Nut type: Special special nut · Thread type: M8x1.25 (standard thread) · Drive: Hexagon socket · Ø outside: 13 mm · Height: 15 mm · Thread depth: 9 mm · Width across flats SW: 8 mm
5,60 EUR
Hot 
swiing® ingenious wheel hub spoke rim with disc brake chrome
Manufacturer: swiing® ingenious parts · Color: Chrome · Material: Aluminum · Surface: chrome-plated · Area of application: Cross · Area of application: MX · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø axle: 12 mm · Ø Receptacle: 12 mm · Ø outside: 120 mm · Ø bolt circle: 104.5 mm · Width: 77 mm · Thread type: M8x1.25 (standard thread) · Number of spoke holes: 36 pcs · Ø spoke hole: 3.7 mm · Number of fixing points: 5 pcs
171,70 EUR
Hot
swiing® ingenious wheel hub spoke rim with disc brake black
Manufacturer: swiing® ingenious parts · Color: black · Material: Aluminum · Surface: anodized · Ø inside: 12 mm · Ø outside: 32 mm · Ø bolt circle: 104.5 mm · Width: 77 mm · Number of spoke holes: 36 pcs · Ø spoke hole: 3.7 mm
171,70 EUR
Brake caliper disc brake EBR Harry & hydraulic
Surface: varnished · Color: red · Saddle type: Floating saddle (fist saddle) · Total length: 105 mm · Width: 65 mm · Height: 82 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Hole spacing: 42 mm · Thread type: M8x1.25 (standard thread) · Ø External connection: 10 mm
88,10 EUR
EBR telescopic fork hydraulic extended black (with tabs for disc brake) | Puch
Manufacturer: EWC · Material: Aluminum · Material: Steel · Surface: chrome-plated · Surface: varnished · Color: Chrome · Color: black · Adjustable: Yes · Ø spars: 28 mm · Spar end distance (center-center): 150 mm · Ø outer head tube: 26 mm · Ø head tube inside: 22.15 mm · Head tube length: 200 mm · Total length: 675 mm · Fork bridge - center wheel axle: 445 mm · Distance brake cam to wheel axle center-center: 35 mm · Thread type: MF26x1 (fine pitch thread) · Thread length: 58 mm
366,30 EUR
EBR fork upside-down super strong | Puch
Manufacturer: EWC · Material: Steel · Surface: chrome-plated · Surface: varnished · Adjustable: Yes · Ø spars: 30 mm · Color: Chrome · Color: black · Spar end distance (center-center): 145 mm · Ø outer head tube: 25.15 mm · Ø head tube inside: 20.7 mm · Head tube length: 217 mm · Total length: 720 mm · Fork bridge - center wheel axle: 468 mm · Distance brake cam to wheel axle center-center: 40 mm · Thread type: MF26x1 (fine pitch thread) · Thread length: 58 mm
263,10 EUR
66HEROES Disc brake reservoir cover, black anodized aluminium
Manufacturer: 66HEROES · Material: ABS plastic · Surface: anodized · Color: black · Total length: 54 mm · Number of fixing points: 2 pcs · Width: 27 mm · Ø mounting hole: 4.5 mm · Mounting type: Screws · Hole spacing: 41 mm
18,20 EUR
22,80 EUR
Page 1 of 2
Powerful and reliable disc brakes for your Puch moped
A well-functioning and grippy brake plays an important role in riding safety. If you have tuned your moped and are travelling at high speeds on the racetrack or on the track, the standard brake system is often no longer sufficient. In this case, you should definitely retrofit a complete disc brake system with brake disc, brake calliper and corresponding brake line and brake lever to replace the original brakes on your Puch-Maxi moped or X30. You will find all the parts you need for this in our range in top brand quality.
Retrofitting disc brakes to your Puch moped
Retrofitting a disc brake to your Puch moped is a little more complicated. This is because most of the brand's models are not designed by the manufacturer to be fitted with disc brakes. You may therefore have to fit a new wheel hub to your Puch moped that is suitable for operation with a brake disc. In most cases, the moped fork must also be replaced, as it must have a bracket for the brake calliper. Of course, you will also have to fit various small parts, such as the hose, the brake lever and the reservoir for the brake fluid, if you decide to fit a hydraulic disc brake to your Puch moped. However, the effort is worth it. This is because disc brakes develop a significantly more constant and higher braking performance than drum brakes or even rim brakes with brake shoes.
High-quality brand quality for maximum safety and performance when braking
If you are going to go to the trouble of retrofitting a disc brake to your Puch moped, you naturally want to be able to rely on the installed parts without restriction, even under the highest loads. That's why we only offer you components or complete sets of outstanding brand quality from renowned manufacturers for your new brake. Among other things, you have the option of ordering forks from EBR for your Puch moped as well as the complete, perfectly fitting disc brake system including all the necessary parts as a ready-to-fit set. We also offer all individual parts such as reservoirs, lines, brake levers and brake callipers for your moped from the Austrian manufacturer. You can also order a matching rim including brake disc from us.
Buy your new disc brake for your Puch moped online at mofakult
If you want to equip your moped with a disc brake, don't make any compromises and rely on proven brand quality. Among other things, we offer you numerous parts for your disc brake from our own brand swiing, which are characterised by excellent workmanship and precision fit. All parts for the disc brake on your Puch moped are available from us at fair prices and can be conveniently delivered to your door within a few days. Most of the parts we offer are available directly from stock. In addition to new disc brakes, you can also get all other wheel and tyre parts for your Puch moped from us. Do you have any questions about a spare part from our range, or can't find a spare part that is out of stock? Then simply get in touch with us, drop us an e-mail or give us a call. We will be happy to support you with detailed advice.
Our favorite manufacturers
Collection only possible with online purchase and appointment.
